Parts Name Part Number System Name Part Function Picture
Keys for Envoy and EMC WS0100069-P5 CPU DOOR LOCK KEYS (Set of 2) These are the keys to open the Worksurface storage area.
5AH SLA battery 8116611 5 AH SLA BATTERY This BUB is located in the bucket. It allows the cart to stay powered on for 2 minutes once the Mobius Battery is removed.
EMC Mobius wiring harness HC0400829 MOBIUS COLUMN RACEWAY AND HARNESS ASSEMB The wiring harness is the central power connection between the holster and the base of the workstation.
LIGHT BUTTON MEMBRANE(EMC) HC0300013 LIGHT BUTTON MEMBRANE/CONSOLE This part is located on the front of the table top. It has a power button for keyboard LEDs.
Mobius HCMM HC0400630 PLUG-IN POWER HCMM FOR LCD, SHUNT ON PIN The HCMM board is the brains of the actuator system, and holds the codes for the drawer system.
Mobius HCMM Board for Laptop Workstation HC0400790 PLUG-IN POWER HCMM FOR LAPTOP, SHUNT ON This HCMM board is for the EMC Mobius Laptop Workstation only.
Mod Bus that Connects the HCMM and CHAC HC0400190 6 WIRE MODBUS HARNESS HCMM/CHAC This transfers power to the CHAC from the HCMM board and is located underneath the work surface in the table top.
Base without Isolators HC0400448 EMC BASE ASSEMBLY 5 CASTERS This part is located on the bottom of the cart. This part does not have the white caps above the wheels and should be used on carts without med drawers or smaller configurations.
CHAC Board HC0400189 CHAC BOARD ASSEMBLY This part is located under the work surface in the table top. This is the motor controller board for the actuator motor. Power for the med board is also connected here.
Mobius Output Box 6115861 MOBIUS 4 OUTPUT ASSEMBLY Four port output box under the worksurface that allows DC Kycon cables to connect to it. NOTE:The voltages for each port is different and needs to be changed to meet your needs.
EMC Actuator HC0100361 EMC ACTUATOR T-MOTION 800N The Actuator for actuated workstations.
Metal Lever Kit For Gas Spring EMC HC0400002 Metal Lever Kit For Gas Spring EMC NA
Level 3 Gas Spring 265N HC0100021 GAS SPRING, LEVEL 3: 265N Gas Spring for gas spring workstations. This verison is for workstations that have drawer systems.
Gas Spring Handle Assembly HC0400844 CUSTOMER SERVICE GAS SPRING LEVER ASSEMB This part is located under the right side of the table top handle and is only on gas spring style carts. It activates the gas spring to lower or raise the cart.
200N Gas Spring HC0100007 GAS SPRING LEVEL 1: 200N This is the smallest Gas spring for the EMC workstatiosn that do not have Drawers on them.
235N Gas Spring HC0100020 GAS SPRING, LEVEL 2: 235N Gas Spring for gas spring workstations. This verison is for workstations that have single tier drawers or no drawers at all.
EMC 1-5 Membrane HC0300014 KEYPAD MEMBRANE RT SIDE 1-5 (NON-TACTILE) This part is located on the right side of the handle on the table top. It is used to input pin code to unlock the drawers systems.
EMC Blank Right Side Membrane HC0300015 BLANK MEMBRANE RT SIDE Blank membrane meant for workstations that are not prebuilt for drawers, or not drawer ready.
EMC 1-5 Membrane Cable HC0300018 8 PIN CONNECTOR CABLE 31 Cable that connects the 1-5 membrane and the HCMM board.
EMC Med Board HC0300035 EMC MED/OVERRIDE SOLENOID BOARD (NEW) This part is located in the back of the med drawer. It powers all solenoids and allows them to open once the correct pin is pressed. It connects to the HCMM board as well as a BUB.
EMC Monitor Pole Base Screw HC0700140 MOUNTING SCREW This large screw is located inside the lower part of the monitor pole and secures it to the cart. The lower part of the monitor pole gas spring is also secured to the top of this screw.
EMC Monitor Pole Base Screw Coupler HC0700139 MP LOWER COUPLER This coupler is located and screwed into the top of the actuator. It allows the Monitor Pole Base Screw to be screwed down and secured to the cart.
EMC Mobius Work Surface HC0400823 MOBIUS LCD WORK SURFACE W/BEZ This is located on the top of the cart and connects to the table top. This part acts as a barrier to protect the electronics underneath it as well as a work surface for nurses to use. It is also where the up/down membrane is located
EMC Mobius Gas Spring Tabletop Handle Assembly HC0400035 MP LOWER COUPLER This part is located at the top of the cart and is only found on gas spring style carts. It houses numerous electronics such as PC or HCMM/CHAC board. This is the main handle used to push the cart as well as where fuel gauge, 1-5 membrane, and keyboard LED are located.
EMC Tabletop Gas Spring Bracket HC0700148 BRACKET, ACTUATOR M/P LIFT (IN HOUSE) This bracket is located underneath the work surface. This bracket connects the top of the gas spring to the cart. It is also where the cable used to activate the gas spring runs.
EMC Gas Spring Left Handed Blank Membrane HC0300122 TEAR-DROP MEMBRANE W/ BLANK OVERLAY This is found on the top left side of the work surface. It is usually found on gas spring style carts and replaces the up/down membrane of an actuator style cart.
EMC Handle Support Bracket HC0400985 ASM, HANDLE SUPPT, STD TOP, CUST SVC KIT This bracket is located underneath the handle of the table top. Its main purpose is to support the handle and prevent cracking. It connects underneath the handle and underneath the table top itself.
EMC Mobius Actuator Handle Assembly HC0400973 EMC MONITOR MOBIUS POWERED ACTUATOR HAND Table top assembly for the actuated Mobius Workstation.
EMC Gas Spring Monitor Pole HC20-EC-RMON EMC MONITOR POLE WITH REINFORCED VESA Monitor assembly for the Gas Spring workstation.
Monitor Pole For Actuator Cart HC0400632 REINFORCED VESA, MONITOR POLE UPPER ASSY Top section of the monitor Pole. This is where the Vesa mount resides.
Lower Actuator Monitor Pole HC0400215 MONITOR POLE LOWER ASSEMBLY, ACTUATOR CA N/A
Up/Down Membrane for EMC HC0300118 UP DOWN MEMBRANE NON-TACTILE N/A
CHAC to Up/Down Membrane Cable HC0300121 CABLE, 10 CONNECTOR #6 N/A
EMC Keyboard Tray without Cobra Arm HC0400716 MOLDED KEYBOARD ASSEMBLY N/A
EMC Keyboard Tray Cobra Arm HC0400127 STANDARD KEYBOARD MECHANISM N/A
EMC Cobra Arm HC0100199 STANDARD KEYBOARD MECHANISM N/A
EMC 235N Gas Spring Column Assembly HC0400055 POWERED COLUMN KIT, #2 (235N) GAS SPRING N/A
EMC screws for base/tabletop assembly BHCS M6 x 1.0 x 14 SS SCREW, M6 X 14 BHSC SS N/A
10 Amp Mini Fuse for EMC HC0300082 FUSE 10 AMP MINI N/A
EMC keyboard tray screws P0002618 BUTTON HEAD SOCKET CAP SCREW N/A
Lens cover screws for keyboard light(EMC) TX-PHTS 0-42 x .25 SS SCREW, 0-42 X 1/4 PH TORX (HC0900223) N/A
Med Drawer White Rivets BDRV .125 X .375 WHT BLIND RIVET, .1/8 X .375 ENOVATE WHI N/A
Monitor Pole Guide Pilot(EMC) SSS-CP 6-32 X .75 SS SCREW, 6-32 X 3/4 SET SCREW (HC0900209) N/A
Phillip screws for Solenoids and Boards(EMC) 9114225 PPHMS 6-32X1/4 ZN N/A
Tabletop Bottom 3mm Head BHCS M5 X 0.8 X 12 SS SCREW, M5 X 12 BHSC SS (HC0900121) N/A
Tabletop Latch T10 Head TX-PHTS 4-20 X .25 ZNC TORX THREAD-FORMING PH 4-20 X 1/4 (HC N/A
Tabletop Lid T10 Head(EMC) TX-PHTS 4-20 x .5 ZNC SCREW, 4-20 X 1/2 PH, ZINC N/A
LED Handle Lens Cover(EMC) HC0800072 EMC STD HANDLE TRAY LENS COVER FR5 N/A
LED Handle Lens Cover Assembly (with screws) HC0400758 LENS COVER SERVICE ASSEMBLY N/A
Large - LED Handle Lens Cover(EMC) HC0800090 LARGE HANDLE LENS CAP FR5 N/A
Monitor Pole Set Screw(EMC) SSS-CP M4X0.7 X 4 SS Not in CSI N/A
EMC Base with Isolator Kit HC0400448WI EMC BASE ASSEMBLY 5 CASTERS W/ISOLATORS N/A
EMC Swivel Caster HC0100178 SWIVEL CASTER, DOUBLE BALL BEARING N/A
EMC Directional Locking Caster HC0100179 SWIVEL CASTER W/ DIRECTIONAL LOCK N/A
EMC Total Locking Caster HC0100180 SWIVEL CASTER W/ TOTAL LOCK N/A
Mobius Control Board 8116720 MPS SERIAL MAIN CONTROL N/A
Mobius Holster Board 8116729 MPS SERIAL HOLSTER CHARGER N/A
Mobius DC Board 8116734 MPS SERIAL DUAL DC-DC N/A
EMC Screw for Battery Bucket BHCS M6 X 1.0 X 12 SS SCREW, M6 X 12 BHSC SS This screw holds the battery housing to the base.
EMC Drawer Solenoid HC0100015 SOLENOID, LATCHING, MAGNET SHULTZ N/A
Hoslter Assembly Screw 9114095 SCREW, BHSCS M6 X 16 SS 3 Screws Per Workstations.
Holster Assembly Washer 9114337 WASHER, EXT TOOTH LOCK, 1/4, ZINC 3 Washers Per Workstations.
Gas Spring nut HC0700004 CUSTOM GAS SPRING NUT/SPACER, M8 X 1.0 1 Per Gas Spring Workstation
Gas spring O-ring HC0100013 O RING 1 Per Workstation
Monitor Vesa Screw Kit HC0400360 VESA SCREW KIT This kit has differenct size screws to attach various monitors and All-In-One PCs to the workstation.
Monitor Pole Side Screw(EMC) P0000884 SCREW, M4X1.75 X8, PLASTITE, FH TORX, SS This is the screw that holds the lower monitor pole to the upper monitor pole. There are two per monitor pole.
Laptop Risers HC0400765 LAPTOP RISERS FOR EMC & LITE CARTS These are the laptop risers for the EMC workstation.
EMC Codelock Hook HC0700333 EMC MED CODELOCK HOOK EMC Codelock locking hook.
Molex Connetor - 4pin HC0400060 EMC MED CHARGE AND SIGNAL WIRE This part and the HC0300046 and HC0300047 are required when being ordered.
4 Pin Molex Connector HC0300046 MOLEX FEMALE CONNECTOR - 4 PIN This part and the HC0400060 and HC0300047 are required when being ordered.
6 Pin Molex Connector HC0300047 MOLEX 6 CRCT DUAL This part and the HC0400060 and HC0300046 are required when being ordered.
Rear Wrap of the Power System 4118668 WRAP ENCLOSURE, AMAZON N/A
Face Place for DC Board Slot 4116946 FACE DC - DC N/A
Face Plate Mounting Bracket 4116948 BRACE 7 SEGMENT DISPLAY N/A
Face Plate Mounting Bracket 4117419 BRACE 7 SEGMENT DISPLAY N/A
Control Board Mount 4117669 MOUNT V3 CONTROLLER N/A
Control Board Face Plate 4117670 PLATE V3 CONTROLLER N/A
LCD Mounting Bracket 4117963 RETAINER, LCD N/A
DC Board Mount 4116945 MOUNT DC -DC N/A
Inner Holster Insert 8116682 INSERT HOLSTER INJECTION N/A
Backup Battery Holder 4118672 HOLDDOWN BATTERY N/A
Mobius Power System Top Cover 4118673 TOP ENCLOSURE N/A
Tape for the LCD Board 8110264 TAPE FOAM NEOPRENE .5X.125 X 50 N/A
Fuel Gauge Membrane Cable HC0300019 CABLE, 33 CONNECTOR #6 Both the HC0300018 and HC0300019 are needed for the fuel guage.
Fuel Gauge Membrane Cable HC0300018 8 PIN CONNECTOR CABLE 31 Both the HC0300018 and HC0300019 are needed for the fuel guage.
Cobra Arm Screws P0000893 SCREW, MACH, M5 X 0.8 X 12, BH TORX, SS This part is used to Attach the Cobra Arm to the Tabletop
EMC Column Assembly with Gas Spring HC0400055 POWERED COLUMN KIT, #2 (235N) GAS SPRING Column assembly with Gas Spring
Back Up Battery to Control Board Cable 6115889 CABLE ASM, BUB RETRO-FIT N/A
Roller Bracket HC0400001 ROLLER BRACKET ASSEMBLY N/A
Mouse Holder HC0800064 EMC KEYBOARD MOUNTED MOUSE N/A
EMC Cable Cover For Monitor Pole HC0800103 EMC Cable Cover For Monitor Pole N/A
EMC Mobius Complete Holster 6115674 EMC Mobius Complete Holster EMC Mobius Complete Holster
SOLENOID CABLE HARNESS ASSEMBLY for EMC HC0401003 SOLENOID CABLE HARNESS ASSEMBLY for EMC SOLENOID CABLE HARNESS ASSEMBLY for EMC